The wood has natural properties that can assist it withstand the weather but to make it last even longer we apply a ‘colour harmonising’ finish in the factory, which incorporates a preservative. We then apply a micro-porous protective stain or paint finish.

Basic Cleaning – carry out recurrently no less than twice a year

For general cleaning use a soft cloth and water with cleaning soap or washing-up liquid

To remove grease marks, use washing-up liquid with little or no water then rinse with clean water

Don’t use glass cleaner on frames

Don’t use kitchen / rest room cleaners

Wood is not indestructible. Maintenance of the coated finish is necessary, not only to keep the window or door looking good, however with the proper upkeep your products should last even longer than their guarantees.

To Recoat

It is strongly recommended that the surface coating is inspected yearly and if required you need to re-coat the wood with micro-porous stain or paint.

Right here’s how:

Clean the window or door as above and let it dry utterly

Use a fine grade of wet and dry silicon carbide abrasive paper to lightly rub down the prevailing paint or stain finish (don’t attempt to rub through the present coat. This exercise is intended only to remove any grease and dust and provide a smooth surface)

Remove all mud and particles with a wet fabric, taking care to keep away from inhalation of the mud

Allow to dry completely

Apply the micro-porous end with a brush, taking care to not overload the brush or get the end on the seals or gaskets

Only use micro-porous paint or stain. Avoid non-micro-porous finishes reminiscent of yacht varnish as they want stripping and renewing more often. And it’s best to follow the directions on the container carefully.

Scratches and Chips

Damaged timber ought to be re-painted or re-stained immediately

First, prepare the damaged space by removing all surface damage with a light abrasive following the road of the grain

Remove all mud and debris with a wet fabric, taking care to avoid inhaling the mud

Where crucial, a timber filler may be used to repair the damage and provide a smooth surface for reapplying the end

Re-apply the end to the damaged space as described above

Failure to treat scratches and chips will invalidate the product guarantee.

Knots, Grain and Movement

Wood is a natural product and features comparable to knots and variations in grain appearance do occur. This is just not a fault but part of the natural great thing about our timber product. As a natural product some degree of movement when it comes to growth or contraction will be expected..

For more on Traditional Timber Windows look at the site.